Neurology India
menu-bar5 Open access journal indexed with Index Medicus
  Users online: 5231  
 Home | Login 
About Editorial board Articlesmenu-bullet NSI Publicationsmenu-bullet Search Instructions Online Submission Subscribe Videos Etcetera Contact
  Navigate Here 
 Resource Links
  »  Similar in PUBMED
 »  Search Pubmed for
 »  Search in Google Scholar for
 »Related articles
  »  Article in PDF (3,604 KB)
  »  Citation Manager
  »  Access Statistics
  »  Reader Comments
  »  Email Alert *
  »  Add to My List *
* Registration required (free)  

  In this Article
 »  Abstract
 » Introduction
 »  Materials and Me...
 » Results
 » Discussion
 »  References
 »  Article Figures

 Article Access Statistics
    PDF Downloaded44    
    Comments [Add]    
    Cited by others 9    

Recommend this journal


Table of Contents    
Year : 2012  |  Volume : 60  |  Issue : 2  |  Page : 191-197

Stereoscopic virtual realistic surgical simulation in intracranial aneurysms

1 Department of Neurosurgery, International University of Health and Welfare, Atami Hospital, Atami, Japan
2 Department of Neurosurgery, Kochi Medical School Kochi University, Nankoku, Japan

Date of Submission17-Dec-2011
Date of Decision05-Jan-2012
Date of Acceptance04-Mar-2012
Date of Web Publication19-May-2012

Correspondence Address:
Hiromichi Nakabayashi
Department of Neurosurgery, International University of Health and Welfare, Atami Hospital, 13-1 Higashikaigan-cho, Atami 413-0012
Login to access the Email id

Source of Support: None, Conflict of Interest: None

DOI: 10.4103/0028-3886.96399

Rights and Permissions

 » Abstract 

Background: Three-dimensional (3D)-computed tomographic angiography (CTA) has been widely used for surgical simulation of intracranial aneurysms. Stereo imaging technology is progressing rapidly in recent years and stereo imaging may make more realistic surgical simulation possible. Therefore, we aimed at the establishment of a technique for stereoscopic viewing of minute volume rendering images while pursuing a low cost. Materials and Methods: Between January 2009 and June 2011, 54 patients with ruptured intracranial aneurysms were enrolled in this study. CTA data was transferred to the workstation equipped with image-processing software, and multilayer fusion images were processed by neurosurgeons. Image data for stereoscopic viewing of multilayer fusion image from arbitrary directions were collected form rotational trajectories around an aneurysm and were output to MPEG file. Stereoscopic viewing using MPEG data was achieved by the freeware named Stereo Movie Maker. Stereo viewing method using QuickTime VR format was also tried. Results: Multilayer fusion image created from CTA data displayed clearly the anatomical information about not only the aneurysm but also the surrounding structures, such as parent artery, venous system, brain tissue, skull bone, and scalp. The quality of the resulting multilayer fusion image was suitable for surgical simulation with virtual reality. Virtual realistic surgical simulation became possible by the combination of minute multilayer fusion image and stereoscopic viewing by our method. Conclusions: Our method for stereo viewing of multilayer fusion images resulted in an improvement in the capability of diagnostic imaging and the image-guided support for neurosurgical procedures in intracranial aneurysm.

Keywords: 3D-CTA, intracranial aneurysm, stereo imaging, surgical simulation

How to cite this article:
Nakabayashi H, Shimizu K. Stereoscopic virtual realistic surgical simulation in intracranial aneurysms. Neurol India 2012;60:191-7

How to cite this URL:
Nakabayashi H, Shimizu K. Stereoscopic virtual realistic surgical simulation in intracranial aneurysms. Neurol India [serial online] 2012 [cited 2021 Sep 20];60:191-7. Available from:

 » Introduction Top

Prognosis of aneurysmal subarachnoid hemorrhage (aSAH) remains poor with a mortality rate of 25-50%, and 10-20% of the affected patients remain severely disabled. [1] The factor that most correlates with prognosis is the severity of illness at the time of first rupture of aneurysm, and aneurysm rerupture can greatly aggravate the condition of the patient. In Japan, surgical treatment for aSAH, craniotomy, or endovascular treatment is usually performed "early," wherein a surgical procedure for a ruptured aneurysm is performed within 72 h of the onset of SAH in order to prevent rerupture. [2],[3] Moreover, for patients with Hunt and Kosnik grades I-IV, urgent surgical procedure is usually performed within a few hours of the onset of aneurysmal rupture. Preoperative accurate diagnostic imaging and optimal surgical planning are keys to the success of the surgical procedure. Although there is sufficient preparation time in a scheduled surgery, this may not be the case in emergency surgeries. Therefore, it is necessary to set up the optimal surgical plan promptly in an emergency surgery. In the recent years, three-dimensional (3D) images can be created easily by advanced imaging modalities and computer technologies, and 3D medical imaging has become indispensable to surgical planning. Although imaging modalities other than computed tomography (CT) and a surgical navigation system can be used in a scheduled surgery, in an emergency surgery, they cannot be used owing to shortage of preparation time. The imaging modalities that can be used in an emergency surgery are 3D-CT angiography (CTA) and/or digital subtraction angiography (DSA). Thus, it is important to perform accurate surgical simulations using the data of 3D-CTA and/or DSA. Although DSA remains the gold standard for the diagnosis of intracranial aneurysms, it is invasive and time consuming, and has the risk of aneurysmal rerupture and associated complications, with approximately 0.7% occurrence of permanent neurological injury and less than 0.1% mortality rate. [4] Considering these situations, we aimed to create realistic surgical simulation images only using 3D-CTA data. Meanwhile, stereoscopic imaging using advanced technology to generate more realistic surgical simulation should be pursued. Then, we aimed to develop a low-cost technique for stereoscopic viewing of precise surgical simulation images, with a low set-up time to enable its use in emergency surgeries.

 » Materials and Methods Top


Between January 2009 and June 2011, 54 patients (25 men and 29 women) with ruptured intracranial aneurysm treated by craniotomy (neck clipping) were enrolled in this study. Patients treated with endovascular procedures were excluded. The mean age of the patients included was 58.4 (range, 19-79) years. The locations of the aneurysms were as follows: internal carotid artery-posterior communicating artery (IC-PC) (n = 24), anterior communicating artery (Acom) (n = 21), and middle cerebral artery (n = 9). All patients in this series underwent CTA. It is our policy to treat ruptured basilar artery aneurysm and IC-ophthalmic aneurysms with endovascular procedures and to treat other aneurysms with craniotomy. In patients with suspected carotid stenosis due to neck bruit, we considered it necessary to evaluate the real circulatory status. Therefore, we undertake angiography only for these patients.


Multislice helical CT scanner of 64 detector rows (Aquilion 64; Toshiba Medical Systems, Tochigi, Japan) was used for CTA. All patients were positioned supine with the head maintained in a neutral position; 80 mL of nonionic iodinated contrast medium (Iopamiron 300; Bayer, Leverkusen, Germany) was injected into the cubital vein with an automated injector at a flow rate of 5 mL/s. Then, enhanced images (140 kV and Auto mA; gantry rotation speed, 0.6 s/rotation) were obtained by helical scanning (slice thickness, 0.625 × 64 collimation). The scan delay was set using the Real Prep mode. The scan range included the craniovertebral junction up to the vertex.

Multilayer image fusion

CTA data were transferred to the GE Advantage workstation (GE Medical Systems, Waukesha, WI, USA) equipped with an AW VolumeShare™ (GE Medical Systems). To shorten image processing time, an intra-hospital local area network (LAN) system was built so that our department could acquire Digital Imaging and Communications in Medicine (DICOM) data directly from every imaging modality. This system facilitated us to respond to emergency cases. Image processing began with the segmentation and optimization of each structure, such as the arterial system, venous system, brain tissue, skull, and soft tissue, using AW VolumeShare [Figure 1]d-h. First, the image of the arterial system was segmented [Figure 1]d. To secure the accuracy of volume rendering, the images were segmented while referring to a maximum intensity projection (MIP) image [Figure 1]a-c. After the opacity and color of the image of the arterial system were optimized for detailed observation, the image data were preserved. Visual observation was used to ensure that the aneurysm and surrounding vessels were clearly described in the images. Then, by using a semiautomatic threshold-based segmentation technique, volume images of the brain tissue, skull, and soft tissue were segmented and optimized. Necessary image components were merged and again optimized to obtain the final multilayer fusion image [Figure 1]i-k. Processing of segmentation and fusion of volume data from CTA were performed only by neurosurgeons.
Figure 1: The processes of multilayer image fusion are shown in a case of ruptured right middle cerebral artery aneurysm in a 72-year-old man. (a-c) Maximum intensity projection (MIP) images of the head. (d-h) Segmented structures (d, artery; e, venous system; f, brain and soft tissue; g, scalp; and h, skull bone). (i-k) Multilayer fusion images (i and j, fusion image that merged images of the artery, venous system, and skull bone; k, fusion image that merged images of the brain tissue, artery, venous system, and scalp)

Click here to view

Data acquisition for arbitrary directional stereoscopic images

First, using the newly obtained multilayer fusion image, the most suitable rotational trajectory to observe the aneurysm was set and the image data from 50 directions around the aneurysm were collected while rotating by 7.2° [Figure 2]a and b. Next, the rotational trajectory was tilted 10° up and down, and data were collected similarly. In all cases, image data from 150 or more directions were collected from rotational trajectories around the aneurysm. When image data from further directions were necessary, rotational trajectories for the observation were added [Figure 2]c. Theoretically, image data for stereoscopic viewing from arbitrary directions can be obtained by increasing the rotational trajectories to collect image data. Finally, the collected image data were stored as an MPEG file.
Figure 2: The process of image data acquisition for stereoscopic imaging. (a) The image data from 50 directions around an aneurysm were collected while rotating the viewing angle by 7.2°. (b) A part of the image data obtained from the rotation trajectory is shown. (c) First, the rotation trajectory that was most suitable for observing an aneurysm was set (1). Then, the rotation trajectory was tilted 10° up (2) and down (3), and data were collected similarly. When image data from other directions were needed, rotation trajectories for further observation were added (5-8)

Click here to view

Stereo surgical simulation using MPEG data

We adopted two approaches for stereoscopic imaging. In the first method, MPEG data from the freeware named Stereo Movie Maker ( were used. This software enables various modes of stereo imaging, such as cross-eyed viewing mode, parallel viewing mode, anaglyph mode, and liquid crystal (LC) shutter glass mode [Figure 3].
Figure 3: Screenshot of a set of stereo images for the cross-eye method (upper) and a stereo color anaglyph (lower) of the right MCA aneurysm created by the stereo movie maker

Click here to view

Stereo surgical simulation using QuickTime Virtual Reality (QTVR) format data

In the second method, we used the QTVR format. First, screen shots of each frame were collected from the MPEG file. These screen shots were converted to the QTVR format using Object 2VR software (Garden Gnome Software e.U., Vienna, Austria), which created a stereoscopic image viewable with QuickTime player (Apple Computer Inc., Cupertino, CA, USA) [Figure 4].
Figure 4: Screen shot of a set of stereo images for the cross-eye method (upper) of the right MCA aneurysm displayed on QuickTime player

Click here to view

Viewing of stereoscopic surgical simulation image in the operating room

Viewing of stereoscopic surgical simulation images aseptically in the operation room was achieved by wrapping a touch-screen tablet PC (HP Elite Book 2730 p; Hewlett-Packard Development Company, Palo Alto, CA, USA) within a sterile transparent sheet [Figure 5]a. The displayed image could be rotated freely with a digital eraser pen also wrapped in a transparent sterile film [Figure 5]b.
Figure 5: (a) Screen shot of a stereoscopic surgical simulation image displayed on a tablet PC wrapped in a transparent sterile sheet. (b) Screen shot shows a digital eraser pen wrapped in a transparent sterile film

Click here to view


DSA was performed using a biplane DSA unit (Infinix Celeve; Toshiba Medical Systems, Otawara city, Japan) with a matrix resolution of 1024 × 1024 pixels.

 » Results Top

Multilayer fusion images

Multilayer fusion images were successfully created in all cases. The mean time needed for image processing after DICOM data acquisition was as follows: artery, 5 min; artery and venous system, 12 min; artery, venous system, and skull, 15 min; and artery, venous system, skull, and brain tissue, 23 min. More complicated fusion images, such as a 5-layer fusion image simulating craniotomy, were completed in less than 40 min. Volume rendering images created only from the artery information provided a satisfactory description of aneurysm in all 34 cases. In the cases in which DSA was performed, images of the arterial layer were equivalent to those obtained by DSA for evaluating the characteristics of each aneurysm (location, size, and direction). Arterial layer images also provided an adequate description of the main perforating arteries such as the anterior choroidal artery and Heubner's artery. The venous system consisting of the sylvian vein, superior sagittal sinus, and cortical vein that are encountered during surgery was also described clearly. Even in aneurysms located at the skull base, clear separation and depictions of the aneurysms and bone were possible in three-layer fusion images of the artery, venous system, and skull.

Stereoscopic visualization and virtual surgical simulation

Stereoscopic surgical simulations were performed in all patients scheduled for craniotomy. In a usual emergency surgery, we first performed a stereoscopic surgical simulation using MPEG data. In most cases, image data from 150 directions collected from three rotational trajectories were sufficient for stereoscopic surgical simulation of a ruptured aneurysm. The time needed for the export of an MPEG file from collected image data was about 2 min. In this method, virtual realistic surgical simulation was attained by combining minute multilayer fusion images and stereoscopic viewing. Then, the stereo images were converted to the QTVR format. Subsequently, stereoscopic surgical simulation using QuickTime player was also achieved. The QTVR format enabled us to rotate or enlarge images freely and to observe them from particular angles.

In aneurysms of complex shapes, or in Acom aneurysm surrounded by blood vessels of complicated structures, stereoscopic viewing was especially useful. For Acom aneurysms, there are usually three kinds of surgical approaches: right pterional, left pterional, and interhemispheric. The selection of an appropriate surgical approach using 2D-DSA data is usually difficult; however, this selection was greatly aided by stereoscopic reality simulation based on multilayer fusion images.

We used a wide screen to obtain more accurate surgical simulation. Anaglyph or viewing by LC shutter glasses was useful for the doctor who cannot perform cross-eyed viewing.

Illustrative cases

Although the photographs of the images shown are monoscopic, the actual surgical planning was carried out in stereo.

Case 1: A 63-year-old woman presented with subarachnoid hemorrhage. 3D-CTA revealed Lt IC-PC aneurysm. Stereoscopic simulation was used to better understand the 3D structure around the aneurysm [Figure 6]. Neck clipping of the aneurysm was performed successfully, and her hospital course was uneventful.
Figure 6: (Case 1) Lt IC-PC aneurysm in a 63-year-old woman with subarachnoid hemorrhage. (a) Cranial CT shows diffuse subarachnoid hemorrhage. 3D-CTA (b) shows the aneurysm (arrow). (c) Enlarged stereo surgical view is shown (upper: a set of stereo images for the cross-eye method, lower: a stereo color anaglyph). The stereo image shows vital structures (anterior choroidal artery, arrow head; posterior communicating artery, white arrow head) around the aneurysm (arrow). (d, e) Stereoscopic simulation images for every step of the left pterional approach

Click here to view

Case 2: A 57-year-old man presented with subarachnoid hemorrhage. 3D-CTA revealed Acom aneurysm of a complicated form. Stereoscopic simulation was used to select the surgical approach and understand the 3D structure around the aneurysm. Stereoscopic simulation of the aforementioned three surgical approaches indicated that the left pterional approach was reasonable [Figure 7]. Neck clipping of the aneurysm was performed successfully. The postoperative hospital course was uneventful.
Figure 7: (Case 2) Anterior communicating artery aneurysm in a 57-year-old man with subarachnoid hemorrhage. (a) Cranial CT shows diffuse subarachnoid hemorrhage. 3D-CTA (b) shows the aneurysm (arrow). Stereoscopic simulation images of the three surgical approaches: (c) interhemispheric approach, (d) right pterional approach, and (e) left pterional approach. (f, g) Stereoscopic simulation images for every step of the left pterional approach. (h) Enlarged stereo surgical view is shown

Click here to view

 » Discussion Top

The goal of treatment for ruptured aneurysms is to ensure complete, quick, and safe exclusion of the aneurysm. To achieve this, it is essential to understand the anatomy of the aneurysm and its surrounding structures before surgery. Only information about the aneurysm and the surrounding arteries is needed for endovascular surgery; however, more detailed anatomical information such as that of the venous system, skull, and soft tissues is required to reduce the surgical risk in craniotomy. In recent years, advancements have been made in 3D image processing technology and 3D images can be easily created from data obtained from various imaging modalities. As a result, 3D images are used not only for diagnosis but also for surgical simulation. Several simulation techniques can be used for cerebral aneurysm surgery, such as methods using 3D-CTA, 3D-DSA, and MR, and methods that involve the use of an expensive surgical simulator. The Dextroscope™ (Volume Interactions Pvt. Ltd., Singapore) is a surgical simulator with stereoscopic virtual reality using a hologram and is known to have high accuracy. There are a few reports on the use of the Dextroscope in cases of neurosurgical diseases, including intracranial aneurysm. [5] However, the Dextroscope is expensive, and therefore difficult to be introduced in many hospitals.

It is not feasible to use MR imaging immediately after the onset of aneurysmal subarachnoid hemorrhage because of body movement and difficulty in dealing with the rerupture of the aneurysm while obtaining the images. The simulation of surgery for intracranial aneurysm using 3D-DSA has also been reported. [6] The 3D-angio system can be a powerful tool in neuroradiology, especially for surgical intervention of intracranial aneurysms. 3D-DSA provides vivid 3D descriptions of the structure of blood vessels and is extremely effective for the evaluation of intracranial aneurysms. However, 3D-DSA has the disadvantage that data for bony structures cannot be obtained. Thus, 3D-DSA is the only method by which simulation of craniotomy is difficult. Moreover, 3D-DSA is invasive, and, at present, is not used by many hospitals. Currently, 3D-CTA is thought to be used for intracranial aneurysm surgery simulation in most hospitals. To date, there are many reports on the use of 3D-CTA for surgical simulation of intracranial aneurysms. [7],[8],[9],[10],[11] In most reports, however, surgical simulation was performed using only data of the arterial system, and it is far from simulation with virtual reality. Meanwhile, studies that reported surgical simulation using data of the bony structures and venous system, apart from the artery system, are rare. [12] 3D-CTA image data contain information that is essential for craniotomy, such as information about the venous system, skull, and soft tissues, besides the arterial system. To obtain detailed anatomical information, it is important to set optimal viewing conditions for each structure. Therefore, we adopted an image-processing technique of multilayer fusing of two or more images after optimizing the image segmented from the DICOM data of CTA for each structure.

Meanwhile, the volume rendering image processed from CTA data is only a 2D image when it is still, and it becomes a pseudo-3D image on rotation. Stereoscopic viewing from arbitrary directions should be more effective in realistic surgical simulation. To achieve more realistic surgical simulation, we devised a new method for stereoscopic viewing from arbitrary directions using the Stereo Movie Maker or QTVR technology. By our method, realistic stereoscopic viewing was realized promptly at a low cost.

Up to now, there have been a few reports that have used QTVR technology in medicine. Friedl et al. used QTVR as an educational tool for aortocoronary bypass grafting, and their prototypical implementation into a database-driven and internet-based educational system in heart surgery. [13] Balogh et al. acquired intraoperative images during neurosurgical procedures for later reconstruction with a QTVR stereoscopic image system. They are using this system to learn microsurgical techniques. [14] Another application of QTVR in medicine is as an educational tool to study anatomy. The present study is the first report describing the application of QTVR movie maker in clinical medicine.

For emergency operations with a high degree of difficulty, such as aneurysmal clipping, preoperative realistic imaging and accurate surgical simulation is critical for a successful surgical outcome. Newly devised arbitrary directional stereoscopic viewing of multilayer fusion images enabled detailed surgical planning with 3D virtual reality. The surgical strategy selected on the basis of preoperative surgical simulation proved to be the correct choice during the actual operation, and the operation was carried out without complications in all cases. Stereoscopic virtual realistic surgical simulation is helpful in designing minimally invasive intracranial procedures. Our imaging technique has useful applications in surgery for not only cerebral aneurysms but also other neurosurgical diseases.

 » References Top

1.Hop JW, Rinkel GJ, Algra A, van Gijn J. Case-fatality rates and functional outcome after subarachnoid hemorrhage: A systematic review. Stroke 1997;28:660-4.  Back to cited text no. 1
2.Yamamoto K, Ezuka I, Takai N, Kakinuma K. Comparison of late and early stage surgery for ruptured intracranial aneurysms. Neurol Med Chir (Tokyo) 1992;32:1-4.  Back to cited text no. 2
3.Miyaoka M, Sato K, Ishii S. A clinical study of the relationship of timing to outcome of surgery for ruptured cerebral aneurysms. A retrospective analysis of 1622 cases. J Neurosurg 1993;79:373-8.  Back to cited text no. 3
4.Dion JE, Gates PC, Fox AJ, Barnett HJ, Blom RJ. Clinical events following neuroangiography: A prospective study. Stroke 1987;18:997-1004.  Back to cited text no. 4
5.Wong GK, Zhu CX, Ahuja AT, Poon WS. Craniotomy and clipping of intracranial aneurysm in a stereoscopic virtual reality environment. Neurosurgery 2007;61:564-8.  Back to cited text no. 5
6.Thines L, Taschner C, Lejeune JP, Le Thuc V, Pruvo JP, Bourgeois P, et al. Surgical views from three-dimensional digital subtraction angiography for the planning of aneurysm surgery. J Neuroradiol 2007;34:205-11.  Back to cited text no. 6
7.Matsumoto M, Sato M, Nakano M, Endo Y, Watanabe Y, Sasaki T, et al. Three-dimensional computerized tomography angiography-guided surgery of acutely ruptured cerebral aneurysms. J Neurosurg 2001;94:718-27.  Back to cited text no. 7
8.Kato Y, Sano H, Katada K, Ogura Y, Hayakawa M, Kanaoka N, et al. Application of three-dimensional CT angiography (3D-CTA) to cerebral aneurysms. Surg Neurol 1999;52:113-21.  Back to cited text no. 8
9.González-Darder JM. ACoA angle measured by computed tomographic angiography and its relevance in the pterional approach for ACoA aneurysms. Neurol Res 2002;24:291-5.  Back to cited text no. 9
10.Futami K, Nakada M, Iwato M, Kita D, Miyamori T, Yamashita J. Simulation of clipping position for cerebral aneurysms using three-dimensional computed tomography angiography. Neurol Med Chir (Tokyo) 2004;44:6-12.  Back to cited text no. 10
11.Chen W, Yang Y, Qiu J, Peng Y, Xing W. Clinical application of 16-row multislice computed tomographic angiography in the preoperative and postoperative evaluation of intracranial aneurysms for surgical clipping. Surg Neurol 2009;71:559-65.  Back to cited text no. 11
12.Suzuki Y, Nakajima M, Ikeda H, Ikeda Y, Abe T. Preoperative evaluation of the venous system for potential interference in the clipping of cerebral aneurysm. Surg Neurol 2004;61:357-64.  Back to cited text no. 12
13.Friedl R, Preisack MB, Klas W, Rose T, Stracke S, Quast KJ, et al. Virtual reality and 3D visualizations in heart surgery education. Heart Surg Forum 2002;5:E17-21.  Back to cited text no. 13
14.Balogh A, Preul MC, Schornak M, Hickman M, Spetzler RF. Intraoperative stereoscopic QuickTime Virtual Reality. J Neurosurg 2004;100:591-6.  Back to cited text no. 14


  [Figure 1], [Figure 2], [Figure 3], [Figure 4], [Figure 5], [Figure 6], [Figure 7]

This article has been cited by
1 Usefulness and capability of three-dimensional, full high-definition movies for surgical education
M. Takano,K. Kasahara,K. Sugahara,A. Watanabe,S. Yoshida,T. Shibahara
Maxillofacial Plastic and Reconstructive Surgery. 2017; 39(1)
[Pubmed] | [DOI]
2 Three-dimensional printing technology for treatment of intracranial aneurysm
Yin Kang,Liang-Hong Yu,Tao Xu,Shu-Fa Zheng,Pei-Sen Yao,Man Liu,Yuan-Xiang Lin,Zhang-Ya Lin,Xiao-Min Fan,De-Zhi Kang
Chinese Neurosurgical Journal. 2016; 2(1)
[Pubmed] | [DOI]
3 Three-Dimensional Imaging in Neurosurgical Research and Education
Arnau Benet,Halima Tabani,Dylan Griswold,Xin Zhang,Olivia Kola,Ali Tayebi Meybodi,Michael T. Lawton
World Neurosurgery. 2016; 91: 317
[Pubmed] | [DOI]
4 Virtual Reality Cerebral Aneurysm Clipping Simulation With Real-Time Haptic Feedback
Ali Alaraj,Cristian J. Luciano,Daniel P. Bailey,Abdussalam Elsenousi,Ben Z. Roitberg,Antonio Bernardo,P. Pat Banerjee,Fady T. Charbel
Neurosurgery. 2015; : 1
[Pubmed] | [DOI]
5 Stereoscopy in diagnostic radiology and procedure planning: Does stereoscopic assessment of volume-rendered CT angiograms lead to more accurate characterisation of cerebral aneurysms compared with traditional monoscopic viewing?
Nikolas Stewart,Gregory Lock,Anthony Hopcraft,Jeeva Kanesarajah,John Coucher
Journal of Medical Imaging and Radiation Oncology. 2014; 58(2): 172
[Pubmed] | [DOI]
6 Influence of cumulative surgical experience on the outcome of poor-grade patients with ruptured intracranial aneurysm
Pierre-Jean Le Reste,Pierre-Louis Henaux,Laurent Riffaud,Claire Haegelen,Xavier Morandi
Acta Neurochirurgica. 2014;
[Pubmed] | [DOI]
7 Three-Dimensional Imaging as a Teaching Method in Anterior Circulation Aneurysm Surgery
Pablo Augusto Rubino,Juan Santiago Bottan,Alfredo Houssay,Eduardo Salas López,Jorge Bustamante,Marcos Chiarullo,Jorge Lambre
World Neurosurgery. 2013;
[Pubmed] | [DOI]
8 Anatomical education and surgical simulation based on the Chinese Visible Human: a three-dimensional virtual model of the larynx region
Kaijun Liu,Binji Fang,Yi Wu,Ying Li,Jun Jin,Liwen Tan,Shaoxiang Zhang
Anatomical Science International. 2013; 88(4): 254
[Pubmed] | [DOI]
9 Neurosurgery in the Past and Future. An Appraisal
Dattatraya Muzumdar
Annals of Medicine and Surgery. 2012; 1: 13
[Pubmed] | [DOI]


Print this article  Email this article
Online since 20th March '04
Published by Wolters Kluwer - Medknow